Rising Damp And Its Solution – Few Useful Information

In the buildings, especially the old ones, you’ll find different types of damps on the walls and other parts of the building. However, rising damp is not the most common form of dampness that is found. In today’s world, condensation is the most common type of dampness, however, when the damp is rising, a quick analysis and quick remedial actions must be taken to save the building from getting more damaged. In fact, it is the most misunderstood problems surrounding the building. Therefore, it is essential to treat the right cause of the damp. 

 

Important things you need to know about rising damp

When it comes to rising damp in a building, there are a couple of important things that you need to know about. In the following section, you will get some insight: 

• Rising damp essentially means damp patches. Besides, there can be always signs of stains, which could reach up to a level of 1 metre from the floor level. 
• Often, the buildings that are affected by rising damp, there brickwork or plaster would be salted. The white stains on the surface are the clear indication of damp riring.. 
• In case of rising damp, the plasters of the wall tend to get soft. 
• If there is skirting boards installed, they would start showing signs of rot. 
• Appearance of black mould is a very common symptom of rising damp. If you find black moulds on your walls, in that case, the signs are ominous. It is a clear indication that your wall has been affected by rising damp, and you need to take appropriate actions
  

How to control rising damp? 

If indeed your building has been affected by rising damp, in that case, there are a couple of thorough treatment procedures that needs to be followed. Here they are:

• The first thing which you need to do is to make sure that good quality of DPC solution is used. DPC solutions are meant for treating different kinds of dampness on the walls, and they have proven to be very effective when it comes to handling rising damp
• There are a couple of pre installation processes that you need to keep in mind. If your building is affected by rising damp, you need to make sure that the entire area is removed. Now this is a very crucial phase. It needs to be done by the professional and skilled people. this is because it would require the usage of where different kinds of equipment, along with chemicals are used. 
• Once the dam portion is removed completely, now it is time to apply new plaster. To ensure that raising damp does not occur in the future, there are certain solutions and mixtures that needs to be applied with the plaster. It also needs to be made sure there that area of the building which had raising damp is free from any kinds of leakage. If there are any existing leakages, chances are quite likely that this kind of a situation might occurred in the days to come.  

These are a couple of important things that you need to know about rising damp. If you find the mentioned symptoms on the walls, in that case, you need to get in touch with an expert, who has the skills and knowledge to diagnose the issue and fix it. Also, do not try it yourself as this will need you to have the knowledge of many things. Also, you would require to use chemicals. Without the skill and knowledge, doing it can cause danger. However, you will find multiple different service providers available these days for the job. However, to get the best of services, you need to get in touch with the best one.