There are several kinds of welding jobs and as a welder; you are bound to come across several of them. Some welders work on docks or ships, others work in the automotive industry and some end up working in the pipelines, drilling platforms and oil companies. Some welding jobs require that the welder to work in the air for a very long periods. That is where the role of the safety harness anchor comes in.
What is a Safety Harness Anchor:
The safety harnesses are very well-designed for protecting the welders from falling from very significant heights. They are prepared out of rope or nylon webbing which is tied around a welder’s waist and then secured by tying it to a strong rope which is anchored to some stable point or that is very well secured to some other strong point that will not buckle under a welder’s weight. There are various kinds of harnesses which you may require depending on the level of the work that you are doing.
Types of Safety Harness Anchor:
In case you prefer a lightweight safety harness, then you should consider such harnesses which the FP Pro Harness which have Qwik-Fit buckles and hip D-rings. These are comfortable harnesses and are much more comfortable for several welders who use some other kinds of harnesses. Some safety harness anchor points have both chest straps and buckles. Also, there are harness anchor points which only have chest straps. You may choose as per your preference. Many welders would prefer harnesses which have both buckles and straps because they feel that these kinds of harnesses are more secure.
The Right Way to Handle the Harness:
The webbing of the safety harnesses is very crucial. Most of them are made of nylon but that end up being a problem for the welders sometimes as nylon is flammable and sometimes catch fire from the sparks which welding creates. You should ideally always try to protect your harness from any stray sparks or flames. You should pay adequate attention to the waist, leg and should straps as these are the places where most of the burn damage occurs. Aprons can be worn over the harness and can serve as a barrier between the nylon and the sparks. Leather protection pieces which will properly fit over the harness straps where they are the most vulnerable are being used by some welders for helping prevent damage from the sparks.
There have been several work-related injuries from certain unfortunate accidents which involve welding safety harnesses. You need to ensure that any harness which you use meets the OSHO standards for adequate safety. One great way to ensure your harness is great is to purchase it from a source which is reputable. The safety harness anchor points which are made badly will end up causing a lot of unwanted trouble. Every harness anchor point should come with a proper set of instructions, which are easily understandable and mentioned. There should be care information with them so that the users can take proper care of the same while using those.
Conclusion
The bottom line is that one of the leading causes of injury and death in the construction sites and several other industries is while working at height. So, fall protection is one measure taken in the worksites as part of the mandates from the Occupational Safety and Health Administration department. The safety harness anchor points of various types available in the market are widely used equipment for maintaining safety standards while working at height.
Comments
Post a Comment