Wheels are an integral part of a car. Of course, wheels are the reason why any car can run in the first place. While wheels are very important and useful, the same set of wheels can be a reason for accidents if they are not properly taken care of. Not just for cars, but the tyres are a sensitive part of motorcycles as well. They need a lot of care; otherwise, the punishment that follows is much severe and hard to recover from.
Thus, one needs to do a research to know more about wheels and tyres. The engine is the main interesting part, but tyres are one of the trickiest parts of the car and most buyers get duped by not doing adequate research about it.
 |
| Car Tyre |
There are a few dos and don’ts that one needs to keep in mind. These should be followed even if you are using Goodyear tyres so as to ensure longevity and good health of the tyres.
Tyre Rotation:
Tyres are often moved from one position on the car to another to ensure even wear and tear. Front tyres carry more of the car’s weight and tend to wear out at about twice the rate of rear tyres, so rotating the tyres can extend their life. Car manufacturers differ in their recommendations, but most manufacturers advise tyres should be rotated every 8,000 to 10,000 km.
There are four common types of tyre rotation:
a. Cross rotation
b. Straight rotation
c. 5 tyre rotation
d. 4 Wheel drive
All the tyres of a vehicle should be interchanged with one another. This ensures that each tyre undergoes the same amount of wear and tear evenly. Cars with front mounted engine have the tyres on the front which is why the chance of getting it wears out is more than the cars having rear mounted engine. Although there is a difference in opinion regarding the frequency of how often the tyres should be changed, the general ideal gap would be within 8000 km to 10000 km.
There are four common types of tyre rotation – cross, straight, five tyre and four wheels drive. Get in touch with an expert to decide which one is ideal for your Goodyear tyres.
Tyre Pressure:
This is one of the things that are often highly overlooked when it comes to taking care of the tyres. There are two major governing factors related to tyre pressures which make it so important. The optimum pressure in the wheels ensures that the tyres are less damaged and driving is safe. Excessive tyre pressure can make handling extremely challenging by making the car spin out, thereby causing accidents. Less pressure in the tyres can increase wear and tear and also increase fuel consumption.
 |
| Tyre Service |
There are different tyre pressures for different conditions. Checking them individually is a must. If that seems confusing then tyre pressures of all Goodyear tyres are made available while purchasing. Following the given values will ensure that the tyres remain healthy and you are out of danger.
Tyre Tread Depth:
This property is something that most users have not ever heard of. Well, this is basically the carving on the surface of the Good Year tyres which helps to remove water between the tyre and the road.
This ensures that the tyre remains safe from aquaplaning and causing an accident. These treads can get worn out due to rough driving, hard braking, and difficult roads. Thus, one needs to avoid such instances so as to ensure proper health of tread depth. The tread depth differs according to the region. Thus, it is best to check with the local traffic department.
Wheel Alignment:
There has been a lot of fuss over wheel alignment. This is because unofficial service centers never cared about it while installing tyres and ended up causing accidents. Improper alignment can cause a car to handle weirdly and go haywire. It also wears down tyres irregularly, making it difficult to maintain tyre rotation and consumes more fuel as well. When tyres are not in alignment, a strange vibration can be felt at higher speeds.
Make sure to get a regular service of your Good Year tyres so as to ensure proper health and safety.
Comments
Post a Comment